Router Login

  • Home
  • Contact Us
  • Privacy Policy
  • Netgear Router Login – Routerlogin.Net
  • Blog

How to Use Public Wi-Fi Safely?

September 11, 2020 By Jack Carson

Almost every person wants to avail of the facility of free Wi-Fi as it can be found everywhere. Free Wi-Fi is undoubtedly an excellent source for downloading various shows without any fuss. Many people are always in need of free public Wi-Fi to access the internet. Apart from those blessings, there is also some curse that may endanger us.

Hackers are always lurking in disguise into the public Wi-Fi region to access information being transmitted over them. Hacking can be done from any place, whether it could be a hotel lobby, airport, coffee shop, any public transport, etc. Therefore, it is mandatory to use public Wi-Fi safely. Without any further delay, let’s quickly dig into the article to check the inevitable 5 ways to use Wi-Fi safely.

5 Tips for Using Public Wi-Fi Safely:

Here the 5 general tips for using public Wi-Fi is illustrated below:

1. Only connect to the conversant or verified network:

The stalest way for hackers to snitch your information is by connecting to public Wi-Fi. A public Wi-Fi often stores all the information regarding whatever you share on social media to whom you are sharing those with.

Therefore, it is inevitable to verify the Wi-Fi network’s name and appropriate SSID from a legal staff member. Apart from that, keep evading the newer connections and try to connect only to the older one.

Turning off your sharing preferences every time you connect to a public Wi-Fi will significantly prevent you from getting hacked. Turn on sharing preferences only when you have to share something urgent with your friend and colleague.

  • How to Setup Netgear Router?

2. VPN is Mandatory:

Virtual Private Network (VPN) provides you a complete encryption policy while sending any data over a network. The data will be transmitted through a secured tunnel between the client and the server.

While you are using public Wi-Fi, all your data goes from your browser to the online server. But, with the help of a VPN, a protected feature stands in between your browser and the online server that you are associated with.

Therefore, VPN is possibly the secured way to retain your information from being hacked on public Wi-Fi due to its robust encryption.

3. Only go with the HTTPS sites:

If you are unable to access a free VPN due to some pesky reasons, make sure only go with the HTTPS sites.  This is significant because of the encryption of whatever data you have sent via your browser to the online server.

With the help of a padlock symbol, you can easily perceive whether the website is safe or not! Click on the padlock symbol to verify if the SSL certificate is from an authorized body.

4. Always stick to the Firewall:

Firewalls may be a significant cause of resentment. Connecting to a public Wi-Fi most of the time may endanger your data transmission. Therefore, you need to keep the Firewall on. It will undoubtedly be the best source to keep your data protected from being hacked if they continuously try to access any unlicensed source.

A firewall acts as a shield to your device from being invaded by various data-based malware. It is an experienced security person that verifies every data via the safest network. Just enable the ‘Firewall’ option from your browser before starting internet surfing.

5. Never share any sensitive information:

Always make sure not to indulge in sharing any kind of provocative information while using public Wi-Fi. Neither any kind of sharing personal information nor any transaction on the open-access of the internet! In case you have to share personal information, wait to return from the office. As at home, you only get private network assurance for sharing that vital information.

Conclusion:

Digital security has become a terrifying threat nowadays. We have to perceive the jeopardies of public Wi-Fi. This may protect internet users and our pleasant ones getting entangled into malicious data thefts. As mentioned above, the tips are simple, hassle-free, and might defend you from cyber-criminals from being exposed. We just need to ensure those tips before connecting to any public Wi-Fi. Therefore, keeping in mind all those points will eventually protect you from those setbacks.

  • How to Recover WiFi Username and Password?

Filed Under: Guides

How to Fix WiFi Connected But No Internet?

September 8, 2020 By admin

While using the router, sometimes we see that our WiFi connection is connected, but there is no internet. This “WiFi connected but No Internet” is very much frustrating. From the past few years, this problem is raising its heights very much. Yet, there is no single specific solution mentioned for this problem.

The problem can occur because of the change in settings of the router or the operating system, which causes this problem. In this case, the user needs to try out different solutions to sort the issue. Now, it is time to escape from that frustrating yellow triangle icon shown against the internet connection.

We have come up with a solution for you now to deal with the “WiFi Connected But No Internet” problem. Continue reading and come to know how to get the internet connection back. 

  • How to Update Netgear Router?

What is this WiFi Connected but NO Internet error?

Before we talk about the solution steps to fix the problem, the user must first understand the problem. You need to know what the exact problem is and why this error happened. The wireless devices, like androids and laptops, directly connect to the router.

The router manages the internet connections of all the devices present in the house. The router has plugged with the modem, which brings a high-speed internet connection to your home.

The WiFi Connected, but no Internet means that your device has connected to the router, but there is no internet connection. If the router has connected to the laptop, that means there is no issue in the laptop’s connectivity with the router.

Fix WiFi Not Connected to the Internet: Possible Fixes

The problem is in the connectivity of the router and modem. So let’s fix it up now. Talk about the following steps to follow and resolve the issue right away.

Check whether other devices are connected or not:

Before you start dealing with the troubleshooting issue, you need to confirm that no other devices are connected with the router except your PC. When your PC is not accessing the Internet while connected with WiFi, you must check the internet connection through another device.

Take another android or another laptop and connect it with the WiFi. Check whether another device is accessing the Internet or not when it’s connected. If other devices are accessing the Internet, but only your PC is the one not accessing the Internet, that means it is a problem of misconfigured settings.

If the Internet is not accessed on any other device, that means the problem is with the network equipment. In the case of NO Connection with all devices, just disconnect the Ethernet cable connected to the modem. Just make a connection between the modem and Computer with Ethernet cable directly.

If this helped and your Internet accessed, your router is the problem. Your router is in fault here, so you need to troubleshoot the router.

Reboot the Computer:

If the Internet is not getting accessed on all the devices, rebooting is not compulsory. On the other hand, if your PC is only affected for the same, then reboot it simultaneously. Rebooting is the initial step of troubleshooting. By restarting the computer, you might get out of this glitch and get back to work.

In case, when the router and PC are connected through Ethernet Cable, then you must use another cable to resolve the problem.

Rebooting the modem and the router:

Sometimes, the PC does not access the Internet while the WiFi is connected. It can happen because of the modem and the router. Rebooting the Router and Modem is quite a fair idea, making sense to deal with the problem. There is no need to reboot through any interface as you do the same with your PC.

Unplug the devices and wait for a few minutes for rebooting. After a few minutes, plug back the router and modem, it might help regain the internet access. You need to plug-in the modem first, to start the router and modem. Let the modem boot up for a minute and then plug the modem.

Wait for a few minutes, and then choose the start back up. Confirm the working status of the router and modem by whether the LED lights lighten up or not. If the system (PC) still shows the same “WiFi Connected but NO Internet,” the problem is actually complicated. At this time, you should call the service provider.

Rebooting or Resetting are the primary methods to get the internet connection back. But if it does not work, consider the issue as a serious problem. 

Check out the IP Settings:

As the point as mentioned above, if the Internet has not accessed multiple devices, the step is not necessary to perform. Still, let us try this step also to check whether the Internet is accessing or not later on.

If the PC is not accessing the Internet, what you can do is take a few steps to diagnose the network issues. Check out whether the computer has a valid IP address or not. If the IP settings are not set up correctly on the computer, it can show internet error, even when connected with WiFi.

If you have Windows 10 in your PC, then go to the System Tray and right-click over there. Click on the “Network and Internet Setting.” Click on the “Change Adapter” option, and then double click on its connection. 

In Windows 7, Go to the Open Network and Sharing Center and then right-click on the network icon. Now time to click on the name of the network and go to the next connections.

Now click on the “Properties” option. There is a list given in which you need to find the Internet Protocol Version 4 and double click on that option. You will be receiving the IP address and DNS server address automatically. Select both options. Set the IP address on the manual, which is made for the advanced users. Please do not enter anything here, because it is invalid.

It is the time to say OK and then get back to the online stage to access the Internet at high speed.

  • Netgear Router Login – Routerlogin.Net

Check the ISP’s Status:

If in case your device cannot catch an internet connection, then you should check the Internet Service Provider (ISP). If the Internet Service Provider is having issues, then the Internet might not access your PC. It is a rare condition, but still, you must check this one out.

Check out the Phone’s data connection and see Comcast and Verizon. Check the one who is providing the Internet. You can check through the website named “DownDetector.” Google or Twitter will reveal what the exact problem is to resolve the issue.

Final Words:

We have explained the possible problems with solutions to help you connect with the Internet. Now in case, whenever you face a problem of “WiFi Connected but NO Internet,” then you can use the mentioned tips to resolve the issue for sure. So don’t get stressed when the computer has connected with WiFi but the Internet is not working. Now you can easily access the Internet without any problem and get a high-speed internet connection as soon as possible.

  • How to Factory Reset the Netgear Router?

Filed Under: Guides

192.168.1.1 Login – 192.168.I.I Default Username & Password

September 5, 2020 By admin

When it comes to modems or routers, very few people know the whole mechanism works because they don’t find it much useful in their daily life to know whether the router’s setting can be changed or how to fix it if any problem arises. 192.168.1.1 is the default IP address, which is used by the majority of the router companies for letting users access the control panel of the router to make essential changes.

You can log in to your router’s admin panel by using 192.168.1.1 default gateway, and in this article, we explained how you could do it and the common problems faced by users. 

How to Login Using 192.168.1.1 IP Address:

  • Open the browser and type https://192.168.1.1 or routerlogin.net
  • Then enter the valid username and password for Login
  • Now you can see the admin panel of your router.

These steps are quite simple and easy to use only if you know the router’s username and password. Many famous router companies let users access the admin panel to users if they want to change. You can access them only if you type the right IP address and use the correct login credentials. Many users face the problem while making 192.168.1.1 Login is because of the invalid password or username.

Also, make sure you type the default gateway IP address correctly because typing mistakes like 192.168.l.l or 192.168.0.1 will not help you access the correct control panel. However, if you are having any problems with valid credentials, then don’t worry about it.

How To Find Username And Password For 192.168.1.1 Login?

One of the most common problems people face while trying to log in 192.168.1.1 IP address is that they don’t know which username and password to use. Even though there is a tremendous amount of information on various sites regarding this topic, if you don’t know the valid credentials to make a login, then there is no use of such things. However, the following are ways to find the username or password details of the router.

  • The router manufacturing company usually provides the username and password in the user manual, so check the manual guide where you might find the required details.
  • Check the company’s official website where they disclose the current username, password for login.
  • Usually, many companies provide a username, password details at the bottom side of the router. 

Forgot The Username And Password Details Of Router:

As human beings, we are not all capable of remembering every small detail and tend to forget it numerous times. If you are stuck in a situation where you have to access the router’s control panel and can’t recall the username, password details, then don’t worry about it.

By resetting the router completely, you can quickly solve this problem and later login to the control panel using IP address 192.168.1.1. So follow the steps mentioned below to reset the router.

  • Find the “reset” button on your router’s backside.
  • Now by using a toothpick or any something hold and press it for 10-15 seconds.
  • When the router is restored to its default setting, open the browser and type 192.168.1.1
  • Use the default username, password for login, and make the login.

However, while resetting the router, you will have to bear the fact that all the previous passwords and important data will get wiped out, and you will have to rely upon the default login credentials. So before opting for this option, make sure you have a valid username and password details.

How To Fix 192.168.1.1 Login Problems?

Sometimes there could be some problems while accessing the admin panel of your router. There could be various reasons why you can’ still log in and face the irritating problem on your computer screen. However, you can check out the following solutions that might fix this issue. 

1. Use Cables Instead Wireless Network

Sometimes there could be an issue with WLAN, and instead of that, you should use the cable network to connect the router to your system. It’s been found in many cases that people who were facing problems while accessing the admin panel of the router resolved the issue when they used proper cable wires. 

2. Use The Correct IP Address

Many router companies use 192.168.1.1 IP addresses as the default gateway, but that’s not the case with every other router company. So if the screen is not showing the login page correctly, then there could be an issue with the data used for login. 

3. Firewall Issue

Sometimes, the firewall installed in your system could also present you to access the default IP address. Try to use different IP such as 192.168.1.254 or any other and see if the problem persists or not. If there is an issue with the firewall, then try to temporarily disable it and then access the router’s control panel. However, don’t forget to reactivate it after the work is done. 

4. Use Alternate Browser

Sometimes, the browser you are using to access the login might not support it because of the add-on or pre-installed extensions. In such situations, either uses a different browser or disable the add-on.

Final Words:

So this is the necessary and required information about how you can use 192.168.1.1 default IP address to access the control panel and make necessary changes. Very few people know the importance of using an admin panel because you can change the wifi name, passwords, and many other things. If you are facing any problem while using the router’s default IP address, you can mention them via leaving a comment below.

  • How to Update Netgear Router?

Filed Under: Guides

192.168.0.1 Admin Login – 192.168.o.1 Default Username & Password

September 4, 2020 By admin

We all like to surf the internet and enjoy seeing various types of content, and a router plays quite an important role here. If you are using D-link, Netgear company’s router, you must have stumbled upon the IP address of 192.168.0.1. If you’re wondering what it is or how to use 192.168.0.1 to access the router’s management console, you are at the right place. In this article, we thoroughly explained the purpose behind router companies using this IP address and how you can use it as a user.

What Is 192.168.0.1 IP Address?

Some famous router companies use private IPs to let users access the router’s control panel for making some basic to advanced changes. When you type 192.168.0.1, it will take you to the router’s control panel, and then you can make some necessary changes using the administrative panel.

The default host address will give much-required information about the router you are using. However, make sure you enter the right IP address because usually, people misspelled 192.168.0.1 as 192.168.0.I here in the latter case, “I” is used, which is not correct, and you would face an error.

  • 192.168.1.254 Admin –  How to Setup Router & Login?

192.168.0.1 Admin Login Steps:

Admin panel of the router is quite essential because here, you can make necessary changes such as change password, wifi name, and even put access control as well. As you should know, the IP address to access the router admin panel would be different for each router. So to access 192.168.0.1 admin login, follow the steps mentioned below.

  • First of all, check the internet connectivity of your computer; it should be connected correctly.
  • Now open the desired web browser and type 192.168.0.1 or http://192.168.0.1  and hit the Enter.
  • You will see the login page of the router which you use.
  • Now enter the credentials such as username and password for login and hit Enter.
  • The router’s control panel will be open, and you can make necessary changes easily.

Default Router’s Username And Password?

Many people get to the login page of router admin, but they can’t enter valid credentials such as usernames and passwords because they don’t know anything about it. As mentioned in the above steps, you will have to enter the router’s correct username, password to access the control panel. Only a few famous router manufacturing companies use 192.168.0.1 IP address, and other companies use the slightly different IP address.

So the first thing you should know is the default IP address of the router you are using and then use the valid credentials such as username and password for login. Here we shared a list of famous companies that use 192.168.0.1 along with essential information.

S.NO Router BrandDefault UsernameDefault Password
13ComadminAdmin
2Belkinadminadmin
3BenQadminAdmin
4D-LinkadminAdmin
5DigicomadminMichelangelo
6LinksysadminAdmin
7Netgearadminpassword
8SitecomsitecomAdmin
9Asusadminadmin
10SynologyadminAdmin
11Arrisadminpassword
12Apple iphoneIOS4.Xrootalpine
13DELLadminpassword
14Huawei ADSL2+adminadmin
15Netcommadminpassword
16Netstaradminpassword
17SAMSUNGadminpassword
18Sigmaadminadmin
19SUNadminadmin
20Telco systemstelcotelco
21TENDAadminadmin
22ZCOMrootadmin
23ZTEadminadmin

How To Fix 192.168.0.1 Login Error?

Sometimes you cannot easily access the control panel of the router, and you will face 192.168.0.1 login error because of a few technical issues. So if there are some issues like a default IP address that is not responding or the control panel’s username is showing invalid credentials. Then follow the simple solutions that we have listed below.

  • Ensure Network Cables Are Connected Properly
  • Hard Reset The Router

Ensure Network Cables Are Connected Properly –

When the router is not connected properly with the system, then you would stumble upon this issue. Usually, if the wires are not connected properly with the router, then your system will not be able to access the default IP of 192.168.0.1, and it’s quite irritating to see the error on the screen.

To fix this issue, ensure that all the wires are connected properly. Make sure the power supply is also working without any interruption because if there is a shortage of power, then the router will show up with a small LED light on the router.

Hard Resetting The Router –

One of the best ways to solve any type of login issues with the default IP are solved by hard resetting the router you are using. If you forgot the valid credentials that require such as username, password then you can fix that issue also by hard resetting the router. It will configure the router on its default settings and then you can use the above mentioned list of username, password for login. So follow these steps to fix the error of 192.168.0.1 login.

  • Turn off your router.
  • Now press and hold the router’s reset button for approximately 15 seconds till it gets turned off.
  • Then release the button and the router will get a reboot.
  • Now access the login panel by entering default username, passwords.

Conclusion:

You can do lots of necessary and essential changes by accessing the router’s control panel. Many people don’t know anything about it, but a few technical problems you face can be fixed by simply altering the administrative panel settings. Usually, people mistype or use a different type of IP address for accessing the login panel. So considering all those points, it’s quite easy and important to know how you can access the 192.168.0.1 login panel successfully.

If you are still facing any technical issues while connecting the router, then you might need a technician’s help and get it immediately. However, leave a comment below if you have doubts or questions regarding it, we will be happy to assist you.

  • How to Update Netgear Router?
  • How to Recover WiFi Username and Password?

Filed Under: Guides

How to Update Netgear Router?

September 2, 2020 By admin

Netgear is a well-renowned brand, and it’s known for its ultimate high-speed router. Netgear Router is a good one to provide high-speed internet connection. Usually, the Netgear Router asks for firmware updates. One needs to do the firmware updates of the router when required. It helps to improve product performance. The firmware update will not only work on the improvement of performance, but it also helps in adding new features and enhance security as well.

If your Netgear Router needs a firmware update, you can do that by following straightforward ways. You can get the updates done with the help of the Nightwk application. Now do not wait for too long; download the Netgear Nightwk application. You can download the Nightwk application through your mobile phone or via the Netgear Web Page also.

  • How to Setup Netgear Router?

To upgrade the specific firmware version, you need to follow the following steps; which are:

  • Use the Ethernet Cable to connect the router and the computer directly.
  • Now go to the Netgear Support.
  • You need to enter the model number and product name.
  • It is the time to click on the Download button. 
  • Choose the Firmware Version and then Click to Download.
  • If there is a requirement to unzip the file, go for it then.
  • Just go to the web browser, and enter routerlogin.net over the search bar.
  • Now, a page will display over the desktop screen.
  • Enter the router admin username and the router admin password.
  • If you have not set any username and password yet, the default user name is Admin. The password is what you had entered for the first time when you logged in to the router. Make sure not to reveal the username and password ever to anyone.
  • Choose the “Advanced” and click on “Administration.” Else, choose the “setting” option, and then click on the Administration.
  • Now select the “Firmware Update” OR the “Router Update.”
  • Now, the router will start getting updated.
  • There are two options located; one is “Choose File,” and the second one is “Browse”. Click on one of the options from both and click on the firmware file, which ends with .img or .chk.
  • It is time to click on the “Upload” button.

It is the time when the Netgear Router starts updating. The router will restart. The update process will take around 2 minutes only, and this is where everything will work on for the correct update.

Final Words:

Now, if you want to update the Netgear Router, then follow the steps as mentioned above. These steps will help to update the Netgear Router properly. Please make sure not to break the order of the steps; otherwise, it will create a router problem to update appropriately.  

Filed Under: Guides

How to Factory Reset the Netgear Router?

August 29, 2020 By admin

Netgear Router is a very popular and well efficient router, which actually deserves to be the best one due to its excellent performance in the internet world. If we talk about resetting the Netgear Router, it needs to be done when the router is not working. In case, the router does not function accurately, then you must reset, or factory reset the Netgear Router.

In case, if you forgot the password, then you should reset the Netgear Router. Many of the folks exist, who knows about resetting is the solution, but they do not know how to factory reset the router. It is essential to follow a step by step guide to learn how to factory reset the Netgear Router. So here let us get started now without wasting a single minute.

  • How to Find Your Router IP Address?

When is Reset or Factory Resetting Required?

Resetting or factory resetting is necessary to do in the Netgear Router when the mentioned problem occurs:

  • When the Netgear Router turns off, then resetting can work on. 
  • The access page does not get connected due to entering the wrong password. 
  • WiFi does not fit or work properly. 
  • Check out the power cord fit properly. 
  • Do not forget to check out that the power supply is on or not.

How to Reset the Netgear Router?

  • Make sure, before you start resetting the router, the power is turned on or not. Just rotate the router to face its back towards your face side. 
  • You will see the reset button over there, which reset the Netgear Router to its default setting.
  • It would help if you had a clip to put inside the reset button. Press the reset button and hold the button pressed for a few seconds.
  • Now after releasing the reset button, wait for 10 seconds. The router will automatically start rebooting once it gets reset.
  • When the reset process starts, then the LED light will begin blinking over the router.
  • When the entire resetting process completes, the router will stop flickering.
  • Now your router is reset to its default setting.

How to Factory Reset the Netgear Router?

  • The Reset Button is positioned behind the router, press it from where the reset process will start.
  • Keep pressing the button for a few seconds with the help of the pinned side of the paper clip. After releasing the reset button a few seconds later, the rest process will start on.
  • When the rest process gets completed, now open the web browser over the PC.
  • Now type the http://routerlogin.net in the search bar.
  • Enter the username and password of the router over the login window.
  • You will receive a homepage that will display how you need to select the Administration option. The Administration Option is positioned under the Advanced Tab.
  • Now time to change the password. Select the Password option and change it. 
  • It would help if you put the older password first, and then the first one.
  • Do not forget to select the “Enable Password Recovery” option, which helps you to regain the password if you lose it in the future.
  • Now click on the “Apply” button, and you are good to go.

Final Words:

I hope now you can quickly factory reset your Netgear Router. In case of resetting the router, usually, the details mentioned above for that as well. So go ahead, and reset the router to attain the expected results.

  • How to Setup Netgear Router?

Filed Under: Guides

How to Setup Netgear Router?

August 22, 2020 By Jack Carson

Netgear is a popular brand for producing advanced routers and modems. Netgear has presented plenty of useful routers to satisfy users’ needs. Netgear routers have benefitted users to such a great extent that they don’t want to rely on any other brand for new routers. However, they all have faced problems while setting up their Netgear router. So, we are going to provide you a step by step guide. Now you don’t have to worry about any problem in Netgear router setup.

Three different processes of setting up Netgear router are going to be discussed. Have a look at them and see which one is convenient for you.

Steps for Netgear Router Setup:

  1. Download Nighthawk application.
  2. Attach the supplied (whether any) antennas and connect the modem to Internet port on the router.
  3. Power on the router. Wait a little for the Wi-Fi LED to light.
  4. Look on the router label on the back or bottom for router’s Wi-Fi network name (SSID) and network key (password).
  5. Go to your smartphones’ settings and tap Wi-Fi.
  6. Connect your mobile to the network listed on the label of your router and put the password.
  7. Install Netgear Nighthawk application on your smartphone.
  8. Follow the detailed instructions in the application to install the router and connect to the internet.

Netgear Router Setup using Router Web Interface:

  1. Connect your modem to Internet port at the back of your router with the help of an Ethernet cable.
  2. Connect your PC to any of the Ethernet ports on your router.
  3. Press “Power” button on your router.
  4. Open any web browser and routerlogin.net and then you will be prompted to log in.
  5. Log in to the router. Set default username as “admin” and password as “password”.
  6. Tap Advanced>>Setup Wizard.
  7. Click on “Yes” radio button and choose “Next”. Let the router detect your internet connection. Then it will prompt you to log in.
  8. Enter and confirm a new admin password.
  9. Then you have to answer two security questions.
  10. Click “Next”. You will get to see “Congratulations” page.
  11. Click on “Print this” to print your network settings if required. This step is optional. You need to do this only when it is essential.
  12. Click on “Next”.
  13. You will see the “Firmware Update Assistant” display page.
  14. If a firmware update is not available, you have to click “Ok”. No, your router is set up.
  15. If a firmware update is available you have to click on “Yes” to complete updating your firmware. After completing the firmware update, your router will reboot. You will be prompted to log in.
  16. Enter the admin and new password you have previously created. You will see the basic display page. Now you are done with setting up your Netgear router with the help of a router web interface.

Connect Your Router to Internet with Smart Wizard:

  1. Launch any web browser from your smartphone or computer which is presently connected to your router’s network.
  2. Enter  http://www.routerlogin.net. You may also enter the default IP address (192.168.0.1 or 192.168.1.1) of your router.
  3. In the next step, Enter your username and password. The username must be admin and default password must be password. Remember these are case sensitive. If the default username and password are not working, you have to try another password that you may have changed. Otherwise, you have to do a factory reset to restore your router to factory defaults. Then you will see the basic display page.
  4. Click “Setup Wizard” situated on the upper left corner of the screen. You will see  “Setup Wizard” screen.
  5. Select “Yes”.
  6. Choose “Next”.
  7. Then “Setup Wizard” will detect your internet connection.
  8. Select “Next”. The router will save your settings. Then you will be connected to internet.
  9. Select “Router Status” under “Maintenance” to check whether you are presently connected to internet.

Choose any one process that you find convenient for you. After setting up your router you get to enjoy a lot of things you like to do. With its superfast internet connectivity, you will like to play games, watch movies, and many more. Don’t wait for anything. If you have your Netgear router complete the setup to enjoy the benefits of an uninterrupted internet connection.

  • How to Find Your Router IP Address?

Filed Under: Guides

How to Recover WiFi Username and Password?

August 20, 2020 By Jack Carson

You might have changed the Wi-Fi password for some security reason or to block the trespassers those who are using your paid data. Now after a month when you are again trying to change, you find that you have completely forgotten it. You can easily solve this problem in a few minutes and can get access to unlimited WiFi.

Note: Every router does not possess the capability to recover your password or username. If these below-mentioned steps do not work then you need to contact the company executives to solve your issues.

  • How to Use Public Wi-Fi Safely?

Methods to Recover WiFi Username & Password:

Method #1

If you want to recover your WiFi Username or Password, then you need to factory reset the WiFi of your router. Once you are done with a factory reset, you can easily use your WiFi by logging into the router by entering the default password and username. Here are the steps on how you can factory reset your router:

  • First of all, take a sharp object like a needle. You can also take a toothpick.
  • Find the small button that is located at the back of your WiFi Router, just below the Reset label.
  • Press that Reset button and hold for at least 30 seconds using a toothpick or needle.
  • Then release the reset button. Your router will restart itself.
  • After this, everything will reset to the default one that includes your password and username. You can now log in to your WiFi router using your default password and username.

Method #2

  1. If your Router WiFi (wireless or wired) is connected to your computer, then get online, go to your browser and type the router’s IP address in your address bar. At the time of login, enter the user name and password. Then click on the “Login” button beside the password box.
  2. A box will appear on your screen, there you will notice a “Setup” button at the top. Tap on the button.
  3. After this, on your left-hand side, click on the “Wireless Settings” option.
  4. Then tap on the “Add Wireless Device With WPS” option below.
  5. After this, a box will pop-up on your screen, from there select the “Manual” option.

Now, you can see all the information related to your WiFi network. You can even see your WiFi password available there.

Note: If you forget the password then there is no other way rather than resetting your router to factory defaults. For factory defaults, press the hidden button just behind your router and hold it at least for 30 seconds and release it. The light on the router will flash and restart itself.

Method #3

  1. If your Router WiFi (wireless or wired) is connected to your computer, then get online, go to your browser and type the router’s IP address in your address bar. At the time of login, enter the user name and password. Then click on the “Login” button beside the password box.
  2. A box will appear, there at the top of the screen, you will notice a “Setup” option, click on that.
  3. After clicking, navigate to the “Wireless Settings” option from that appeared box.
  4. Then tap on the “Manual Wireless Network Setup” option.
  5. Scroll down your page and locate the “Wireless Security Mode”. In this “Wireless Security Mode” section, you can specify your wireless password. You can see your password on the screen or you can find dots. If you find dots, then you again enter a new password. When you are done entering a new password, save that password by clicking on the “Save” option at the top of your page.

Find Your Default Username and Password

Prior to resetting your WiFi router, you should try to log in by entering your default username and password. It might happen that your password or username never changed. Since resetting your router will reset everything, it better to try up with your default username and password. There are many ways to find your default username and password.

  1. Have a visit to RouterPasswords.com- If you not finding your manual or common defaults are not working then you should visit RouterPasswords.com. At RouterPasswords.com, you can find a list containing default usernames and passwords for many routers.
  2. Look at the sticker on your router- Some routers especially those you get from your Internet Service Provider, contain unique passwords. The passwords are sometimes printed on the router’s sticker itself.
  3. Try Out a Common Username and Password- Nearly most of the routers make use of common username and password, i.e., “admin”. You can type “admin” and see whether its working or not.

Overall, these are steps on how you can recover your username and password. Next time, you can follow these above-mentioned steps to recover your WiFi username and password easily.

  • How to Find Your Router IP Address?

Filed Under: Guides

192.168.1.254 Admin IP – How to Setup Router & Login?

August 13, 2020 By Jack Carson

Routers are some of the most useful inventions in the history of technology to date. With the help of routers, people now have access to fast internet at all times. Today we are going to be having a look at how one can easily reset their routers and make sure they can get their internet at its highest speeds free of costs. The method that we are talking about today takes the help of the link 192.168.1.254. The settings region of the router is a goldmine for any hacker. It’s true as almost all of your internet and online security are dependent on your router. Thus if you want to be safe while online, then you should keep the login details of your router to yourself. 

The most common IP address 192.168.1.254 for network security is mostly used by famous brands like Cisco, D-Link, and TP-Link. 

What is a Router?

A Router is an essential device that allows users to connect to the internet. It is one of the necessities for going online. What a router does is, convert the telephonic signals into electronic and computer signals so that devices can process them. This conversion device has been around for decades now. Wireless technology has made routers a crucial component in any computer network now. The security of your system is highly dependent on your router. 

Gaining access to the settings of your router is essential to get your hands on some of the essential informational tools. These are some of the most popular ADSL routers which follow the latest trends in the technology of internet security. To keep your internet secure and to run, you are at the right place because we are going to show you how you can easily reset your routers using the default gateway link on your device.

What is 192.168.1.254?

The 192.168.1.254 link is one of the most common IP addresses that has been around for quite some time now. As router and internet security changed, so has the standard of safety in routers. Over the years, routers have gotten more and more serious about the network security of their users. Manufacturers of routers and ISP services together have worked to make sure that they can get proper network security. Users are taken to the login and credentials page where they can sign in and have a look at the network settings of their router using the default IP gateway link. It can be seen and altered by anyone online if your credentials are weak. With the IP address of 192.168.1.254, one can easily reset their router and ensure that your internet is secure. 

Router Security Protocols:

Many security protocols govern the working of our wireless networks. These security protocols are also helpful for you to ensure that your online information is in safe hands. Let’sLet’s have a look at the most common wireless router security standards –

1. WEP

WEP is the oldest form of online security on any router. WEP stands for Wired Equivalent Privacy, and it is the weakest yet the first step in the protection of routers online. It was made available in September of 1999. It offers consumers the same level of security as in a wired network and hence the name.

2. WPA

WPA stands for WiFi protected access. It is a step forward in the online security standards. This format was made available to the public a year before the WEP standard was discontinued. It was the first time people had access to the 802.11i network. It was also quite prone to cyber-attacks and required to be improved.

3. WPA2

It is the current generation of security standards that is used on most mobile and router devices. Small home networks are entirely secure when they are using WPA2 connections, but more extensive networks are at risk. It makes use of AES, i.e. Advanced Encryption Services. This is because of multiple devices, and anyone can make the entire system vulnerable. It is the most secure and stable form of online security currently.

How to use 192.168.1.254 IP Addresses?

An IP Address is a unique identifier for any device that can connect with the internet. All PC, Smartphones, and laptops have their individual IP Address. When you are related to the internet, the ISP IP address or the router IP address connects with your device IP address to provide you with internet access. The working of this system is quite complicated and depends on the network design. In-home networks, the network type is open and linear. It means that every independent device is connected to a single source. 

192.168.1.254IP: Steps For Setup Router & Login

The first thing to do when you get a new router or internet connection is to connect your ISP cables to the router and setup the wireless connection. This is quite essential for ensuring that your wireless network is secure and has the username and password that you want. The SSID and Password are set up quickly with the help of the router IP Address login. Let’sLet’s have a look at the steps –

  • At first, you will have to connect your ISP wires to the router. Start by connecting the ADSL or VDSL ISP cable to the input of the WiFi. This will help the ISP to pan from a WAN to a LAN system. For the initial setup, you also need to connect your router to a PC using an ethernet cable. 
  • After successfully connecting the router to your PC using the ethernet cable, fire up your device. Head over to your favorite browser and enter the 192.168.1.254 link.
  • It will take you to the login page of the router. Here you have to enter the router Username and Password. It is usually available at the back of the router if you have not made any new changes to your settings. Enter your correct login details.
  • On the router landing page, go to the settings option to set up your router SSID and Password. Hit save after you have made the necessary changes.

Default Username and Password for Routers:

Many people might have forgotten their router login credentials. It can be concerning when you have to make changes to the SSID and Password or even tweak any other setting. Let’sLet’s have a look at a website that can help you out. Head over the following link, and you can find what the default username and password for your router is. They host information about all significant router manufacturers in an organized alphabetical manner.

S.NO Router BrandDefault UsernameDefault Password
13ComadminAdmin
2Belkinadminadmin
3BenQadminAdmin
4D-LinkadminAdmin
5DigicomadminMichelangelo
6LinksysadminAdmin
7Netgearadminpassword
8SitecomsitecomAdmin
9Asusadminadmin
10SynologyadminAdmin
11Arrisadminpassword
12Apple iphoneIOS4.Xrootalpine
13DELLadminpassword
14Huawei ADSL2+adminadmin
15Netcommadminpassword
16Netstaradminpassword
17SAMSUNGadminpassword
18Sigmaadminadmin
19SUNadminadmin
20Telco systemstelcotelco
21TENDAadminadmin
22ZCOMrootadmin
23ZTEadminadmin

192.168.1.254: Steps to Reset Your Router

Changing the default settings of your router might be something that would be considered severe, but today I am going to be helping you all out with the same. Here are the necessary steps – 

  • Firstly, turn off your router. 
  • Click on the reset button physically present on your router. 
  • Now connect your ISP cable to the router and your router using a cable connection to a PC or Laptop. 
  • Enter 192.168.1.254. Login using your credentials given at the back of your router.
  • Now you can easily make changes in your router SSID, Password, Ping monitors, etc.

Filed Under: Guides

How to Find Your Router IP Address?

July 24, 2020 By Jack Carson

IP address, which actually means internet protocol address, is specifically a special numerical label that is assigned to each and every device that is connected to some computer network that uses Internet Protocol for the purposes of communication.

The IP address isn’t that simple to decipher though as it is of two types, public or external IP address, and local IP address. When you are willing to deal with the IP address of your router, you should know that you are actually talking about a local IP address.

At times one might want to know the IP address as one might need to troubleshoot a network issue or one might need to configure a particular software or one might need to know it for some unavoidable purpose. So, let’s see how one can find one’s IP address.

  • Netgear Router Login – Routerlogin.Net

Best Ways to Find Router’s IP Address:

Method1: Through Command Prompt

  • Find out the Windows icon which is placed in the bottom left of your Windows screen, and right-click on that. Then, select the option of “command prompt”. In case you cannot find the option of “command prompt”, type “command prompt” in the Windows’ search section. Later, double click on the application of “command prompt” or press enter.
  • After clicking on “command prompt”, a new window shall appear. Type “IPCONFIG”, which means “IP configuration”, and then press enter.
  • Later, you would have to find the “Default section” written somewhere down the screen. The number written in front of it shall be the IP address of your router.

In case you are unable to follow the awfully simple procedure of finding your router’s IP address through “command prompt”, you can try using the option of “control panel”, and follow the set of steps mentioned below –

Method2: Through Control Panel

Access the Windows search bar, and find the option of “control panel” and click on it, or, simply type “control panel” and press enter.

  • A window shall appear titled “Control Panel”. Find the option of “Network and Internet”, and click on the option of “View network status and tasks” given below in the light blue color under the “Network and Internet”
  • A new window shall appear, in which you would be able to find the link for “Connection: Wifi”. Click on that link.
  • A pop-up box shall appear in which you would have to find the option of details and click on it.
  • A small box shall appear with a list, titled Network Connection Details. Find “IPv4 Default Gateway” and there would be a number written in front of it. That number would be your IP address.

But in case you aren’t a Windows user, you might have to follow a completely different set of steps. So, if you are a Mac user, you would have two major options to find your IP address, system preferences, and a terminal application.

Method3: Find IP Address on MAC

  • Click on the logo of Apple which is placed on the top left corner of your screen, following which a drop-down menu shall appear. Find the option of system preferences and click on that.
  • A box of options shall appear titled System Preferences. Find the option of “Network” somewhere down the box, specifically, besides the option of “Software Update”.
  • A new box of options shall appear titled Network. Find the option of “WiFi” in the left panel and click on that.
  • Find the tab of TCP/IP present in the top panel and click on that.

The moment you will click on it, you shall find “Router” somewhere in the middle of the screen. The number written in front of it shall be your router’s IP address.

Method4: Through the option of the Terminal App

  • Access the “Terminal App” by opening the folder for “Applications” and double-clicking on the option of “Utilities”.
  • Later, type “netstat -nr/grep default” and press enter
  • A new box displaying some information would appear where you would have to find a specific number written mentioned in front of “default”. That very number is would be your IP address

Conclusion:

In case you are an Android user, you might not be able to extract the information of your IP address through the Android system as Android doesn’t allow access to that information. So, in that case, you would have to install apps that are specifically used in order to find the IP address of a router through Android, One such example of that application is Wi-Fi Analyzer.

  • How to Setup Netgear Router?

Filed Under: Guides

Recent Posts

  • How to Use Public Wi-Fi Safely?
  • How to Fix WiFi Connected But No Internet?
  • 192.168.1.1 Login – 192.168.I.I Default Username & Password
  • 192.168.0.1 Admin Login – 192.168.o.1 Default Username & Password
  • How to Update Netgear Router?

Recent Comments

    Archives

    • September 2020
    • August 2020
    • July 2020

    Categories

    • Guides

    Meta

    • Log in
    • Entries feed
    • Comments feed
    • WordPress.org

    RouterLogin.Kim