Router Login

  • Home
  • Contact Us
  • Privacy Policy
  • Netgear Router Login – Routerlogin.Net
  • Blog

How to Fix WiFi Connected But No Internet?

September 8, 2020 By admin

While using the router, sometimes we see that our WiFi connection is connected, but there is no internet. This “WiFi connected but No Internet” is very much frustrating. From the past few years, this problem is raising its heights very much. Yet, there is no single specific solution mentioned for this problem.

The problem can occur because of the change in settings of the router or the operating system, which causes this problem. In this case, the user needs to try out different solutions to sort the issue. Now, it is time to escape from that frustrating yellow triangle icon shown against the internet connection.

We have come up with a solution for you now to deal with the “WiFi Connected But No Internet” problem. Continue reading and come to know how to get the internet connection back. 

  • How to Update Netgear Router?

What is this WiFi Connected but NO Internet error?

Before we talk about the solution steps to fix the problem, the user must first understand the problem. You need to know what the exact problem is and why this error happened. The wireless devices, like androids and laptops, directly connect to the router.

The router manages the internet connections of all the devices present in the house. The router has plugged with the modem, which brings a high-speed internet connection to your home.

The WiFi Connected, but no Internet means that your device has connected to the router, but there is no internet connection. If the router has connected to the laptop, that means there is no issue in the laptop’s connectivity with the router.

Fix WiFi Not Connected to the Internet: Possible Fixes

The problem is in the connectivity of the router and modem. So let’s fix it up now. Talk about the following steps to follow and resolve the issue right away.

Check whether other devices are connected or not:

Before you start dealing with the troubleshooting issue, you need to confirm that no other devices are connected with the router except your PC. When your PC is not accessing the Internet while connected with WiFi, you must check the internet connection through another device.

Take another android or another laptop and connect it with the WiFi. Check whether another device is accessing the Internet or not when it’s connected. If other devices are accessing the Internet, but only your PC is the one not accessing the Internet, that means it is a problem of misconfigured settings.

If the Internet is not accessed on any other device, that means the problem is with the network equipment. In the case of NO Connection with all devices, just disconnect the Ethernet cable connected to the modem. Just make a connection between the modem and Computer with Ethernet cable directly.

If this helped and your Internet accessed, your router is the problem. Your router is in fault here, so you need to troubleshoot the router.

Reboot the Computer:

If the Internet is not getting accessed on all the devices, rebooting is not compulsory. On the other hand, if your PC is only affected for the same, then reboot it simultaneously. Rebooting is the initial step of troubleshooting. By restarting the computer, you might get out of this glitch and get back to work.

In case, when the router and PC are connected through Ethernet Cable, then you must use another cable to resolve the problem.

Rebooting the modem and the router:

Sometimes, the PC does not access the Internet while the WiFi is connected. It can happen because of the modem and the router. Rebooting the Router and Modem is quite a fair idea, making sense to deal with the problem. There is no need to reboot through any interface as you do the same with your PC.

Unplug the devices and wait for a few minutes for rebooting. After a few minutes, plug back the router and modem, it might help regain the internet access. You need to plug-in the modem first, to start the router and modem. Let the modem boot up for a minute and then plug the modem.

Wait for a few minutes, and then choose the start back up. Confirm the working status of the router and modem by whether the LED lights lighten up or not. If the system (PC) still shows the same “WiFi Connected but NO Internet,” the problem is actually complicated. At this time, you should call the service provider.

Rebooting or Resetting are the primary methods to get the internet connection back. But if it does not work, consider the issue as a serious problem. 

Check out the IP Settings:

As the point as mentioned above, if the Internet has not accessed multiple devices, the step is not necessary to perform. Still, let us try this step also to check whether the Internet is accessing or not later on.

If the PC is not accessing the Internet, what you can do is take a few steps to diagnose the network issues. Check out whether the computer has a valid IP address or not. If the IP settings are not set up correctly on the computer, it can show internet error, even when connected with WiFi.

If you have Windows 10 in your PC, then go to the System Tray and right-click over there. Click on the “Network and Internet Setting.” Click on the “Change Adapter” option, and then double click on its connection. 

In Windows 7, Go to the Open Network and Sharing Center and then right-click on the network icon. Now time to click on the name of the network and go to the next connections.

Now click on the “Properties” option. There is a list given in which you need to find the Internet Protocol Version 4 and double click on that option. You will be receiving the IP address and DNS server address automatically. Select both options. Set the IP address on the manual, which is made for the advanced users. Please do not enter anything here, because it is invalid.

It is the time to say OK and then get back to the online stage to access the Internet at high speed.

  • Netgear Router Login – Routerlogin.Net

Check the ISP’s Status:

If in case your device cannot catch an internet connection, then you should check the Internet Service Provider (ISP). If the Internet Service Provider is having issues, then the Internet might not access your PC. It is a rare condition, but still, you must check this one out.

Check out the Phone’s data connection and see Comcast and Verizon. Check the one who is providing the Internet. You can check through the website named “DownDetector.” Google or Twitter will reveal what the exact problem is to resolve the issue.

Final Words:

We have explained the possible problems with solutions to help you connect with the Internet. Now in case, whenever you face a problem of “WiFi Connected but NO Internet,” then you can use the mentioned tips to resolve the issue for sure. So don’t get stressed when the computer has connected with WiFi but the Internet is not working. Now you can easily access the Internet without any problem and get a high-speed internet connection as soon as possible.

  • How to Factory Reset the Netgear Router?

Filed Under: Guides

192.168.1.1 Login – 192.168.I.I Default Username & Password

September 5, 2020 By admin

When it comes to modems or routers, very few people know the whole mechanism works because they don’t find it much useful in their daily life to know whether the router’s setting can be changed or how to fix it if any problem arises. 192.168.1.1 is the default IP address, which is used by the majority of the router companies for letting users access the control panel of the router to make essential changes.

You can log in to your router’s admin panel by using 192.168.1.1 default gateway, and in this article, we explained how you could do it and the common problems faced by users. 

How to Login Using 192.168.1.1 IP Address:

  • Open the browser and type https://192.168.1.1 or routerlogin.net
  • Then enter the valid username and password for Login
  • Now you can see the admin panel of your router.

These steps are quite simple and easy to use only if you know the router’s username and password. Many famous router companies let users access the admin panel to users if they want to change. You can access them only if you type the right IP address and use the correct login credentials. Many users face the problem while making 192.168.1.1 Login is because of the invalid password or username.

Also, make sure you type the default gateway IP address correctly because typing mistakes like 192.168.l.l or 192.168.0.1 will not help you access the correct control panel. However, if you are having any problems with valid credentials, then don’t worry about it.

How To Find Username And Password For 192.168.1.1 Login?

One of the most common problems people face while trying to log in 192.168.1.1 IP address is that they don’t know which username and password to use. Even though there is a tremendous amount of information on various sites regarding this topic, if you don’t know the valid credentials to make a login, then there is no use of such things. However, the following are ways to find the username or password details of the router.

  • The router manufacturing company usually provides the username and password in the user manual, so check the manual guide where you might find the required details.
  • Check the company’s official website where they disclose the current username, password for login.
  • Usually, many companies provide a username, password details at the bottom side of the router. 

Forgot The Username And Password Details Of Router:

As human beings, we are not all capable of remembering every small detail and tend to forget it numerous times. If you are stuck in a situation where you have to access the router’s control panel and can’t recall the username, password details, then don’t worry about it.

By resetting the router completely, you can quickly solve this problem and later login to the control panel using IP address 192.168.1.1. So follow the steps mentioned below to reset the router.

  • Find the “reset” button on your router’s backside.
  • Now by using a toothpick or any something hold and press it for 10-15 seconds.
  • When the router is restored to its default setting, open the browser and type 192.168.1.1
  • Use the default username, password for login, and make the login.

However, while resetting the router, you will have to bear the fact that all the previous passwords and important data will get wiped out, and you will have to rely upon the default login credentials. So before opting for this option, make sure you have a valid username and password details.

How To Fix 192.168.1.1 Login Problems?

Sometimes there could be some problems while accessing the admin panel of your router. There could be various reasons why you can’ still log in and face the irritating problem on your computer screen. However, you can check out the following solutions that might fix this issue. 

1. Use Cables Instead Wireless Network

Sometimes there could be an issue with WLAN, and instead of that, you should use the cable network to connect the router to your system. It’s been found in many cases that people who were facing problems while accessing the admin panel of the router resolved the issue when they used proper cable wires. 

2. Use The Correct IP Address

Many router companies use 192.168.1.1 IP addresses as the default gateway, but that’s not the case with every other router company. So if the screen is not showing the login page correctly, then there could be an issue with the data used for login. 

3. Firewall Issue

Sometimes, the firewall installed in your system could also present you to access the default IP address. Try to use different IP such as 192.168.1.254 or any other and see if the problem persists or not. If there is an issue with the firewall, then try to temporarily disable it and then access the router’s control panel. However, don’t forget to reactivate it after the work is done. 

4. Use Alternate Browser

Sometimes, the browser you are using to access the login might not support it because of the add-on or pre-installed extensions. In such situations, either uses a different browser or disable the add-on.

Final Words:

So this is the necessary and required information about how you can use 192.168.1.1 default IP address to access the control panel and make necessary changes. Very few people know the importance of using an admin panel because you can change the wifi name, passwords, and many other things. If you are facing any problem while using the router’s default IP address, you can mention them via leaving a comment below.

  • How to Update Netgear Router?

Filed Under: Guides

192.168.0.1 Admin Login – 192.168.o.1 Default Username & Password

September 4, 2020 By admin

We all like to surf the internet and enjoy seeing various types of content, and a router plays quite an important role here. If you are using D-link, Netgear company’s router, you must have stumbled upon the IP address of 192.168.0.1. If you’re wondering what it is or how to use 192.168.0.1 to access the router’s management console, you are at the right place. In this article, we thoroughly explained the purpose behind router companies using this IP address and how you can use it as a user.

What Is 192.168.0.1 IP Address?

Some famous router companies use private IPs to let users access the router’s control panel for making some basic to advanced changes. When you type 192.168.0.1, it will take you to the router’s control panel, and then you can make some necessary changes using the administrative panel.

The default host address will give much-required information about the router you are using. However, make sure you enter the right IP address because usually, people misspelled 192.168.0.1 as 192.168.0.I here in the latter case, “I” is used, which is not correct, and you would face an error.

  • 192.168.1.254 Admin –  How to Setup Router & Login?

192.168.0.1 Admin Login Steps:

Admin panel of the router is quite essential because here, you can make necessary changes such as change password, wifi name, and even put access control as well. As you should know, the IP address to access the router admin panel would be different for each router. So to access 192.168.0.1 admin login, follow the steps mentioned below.

  • First of all, check the internet connectivity of your computer; it should be connected correctly.
  • Now open the desired web browser and type 192.168.0.1 or http://192.168.0.1  and hit the Enter.
  • You will see the login page of the router which you use.
  • Now enter the credentials such as username and password for login and hit Enter.
  • The router’s control panel will be open, and you can make necessary changes easily.

Default Router’s Username And Password?

Many people get to the login page of router admin, but they can’t enter valid credentials such as usernames and passwords because they don’t know anything about it. As mentioned in the above steps, you will have to enter the router’s correct username, password to access the control panel. Only a few famous router manufacturing companies use 192.168.0.1 IP address, and other companies use the slightly different IP address.

So the first thing you should know is the default IP address of the router you are using and then use the valid credentials such as username and password for login. Here we shared a list of famous companies that use 192.168.0.1 along with essential information.

S.NO Router BrandDefault UsernameDefault Password
13ComadminAdmin
2Belkinadminadmin
3BenQadminAdmin
4D-LinkadminAdmin
5DigicomadminMichelangelo
6LinksysadminAdmin
7Netgearadminpassword
8SitecomsitecomAdmin
9Asusadminadmin
10SynologyadminAdmin
11Arrisadminpassword
12Apple iphoneIOS4.Xrootalpine
13DELLadminpassword
14Huawei ADSL2+adminadmin
15Netcommadminpassword
16Netstaradminpassword
17SAMSUNGadminpassword
18Sigmaadminadmin
19SUNadminadmin
20Telco systemstelcotelco
21TENDAadminadmin
22ZCOMrootadmin
23ZTEadminadmin

How To Fix 192.168.0.1 Login Error?

Sometimes you cannot easily access the control panel of the router, and you will face 192.168.0.1 login error because of a few technical issues. So if there are some issues like a default IP address that is not responding or the control panel’s username is showing invalid credentials. Then follow the simple solutions that we have listed below.

  • Ensure Network Cables Are Connected Properly
  • Hard Reset The Router

Ensure Network Cables Are Connected Properly –

When the router is not connected properly with the system, then you would stumble upon this issue. Usually, if the wires are not connected properly with the router, then your system will not be able to access the default IP of 192.168.0.1, and it’s quite irritating to see the error on the screen.

To fix this issue, ensure that all the wires are connected properly. Make sure the power supply is also working without any interruption because if there is a shortage of power, then the router will show up with a small LED light on the router.

Hard Resetting The Router –

One of the best ways to solve any type of login issues with the default IP are solved by hard resetting the router you are using. If you forgot the valid credentials that require such as username, password then you can fix that issue also by hard resetting the router. It will configure the router on its default settings and then you can use the above mentioned list of username, password for login. So follow these steps to fix the error of 192.168.0.1 login.

  • Turn off your router.
  • Now press and hold the router’s reset button for approximately 15 seconds till it gets turned off.
  • Then release the button and the router will get a reboot.
  • Now access the login panel by entering default username, passwords.

Conclusion:

You can do lots of necessary and essential changes by accessing the router’s control panel. Many people don’t know anything about it, but a few technical problems you face can be fixed by simply altering the administrative panel settings. Usually, people mistype or use a different type of IP address for accessing the login panel. So considering all those points, it’s quite easy and important to know how you can access the 192.168.0.1 login panel successfully.

If you are still facing any technical issues while connecting the router, then you might need a technician’s help and get it immediately. However, leave a comment below if you have doubts or questions regarding it, we will be happy to assist you.

  • How to Update Netgear Router?
  • How to Recover WiFi Username and Password?

Filed Under: Guides

How to Update Netgear Router?

September 2, 2020 By admin

Netgear is a well-renowned brand, and it’s known for its ultimate high-speed router. Netgear Router is a good one to provide high-speed internet connection. Usually, the Netgear Router asks for firmware updates. One needs to do the firmware updates of the router when required. It helps to improve product performance. The firmware update will not only work on the improvement of performance, but it also helps in adding new features and enhance security as well.

If your Netgear Router needs a firmware update, you can do that by following straightforward ways. You can get the updates done with the help of the Nightwk application. Now do not wait for too long; download the Netgear Nightwk application. You can download the Nightwk application through your mobile phone or via the Netgear Web Page also.

  • How to Setup Netgear Router?

To upgrade the specific firmware version, you need to follow the following steps; which are:

  • Use the Ethernet Cable to connect the router and the computer directly.
  • Now go to the Netgear Support.
  • You need to enter the model number and product name.
  • It is the time to click on the Download button. 
  • Choose the Firmware Version and then Click to Download.
  • If there is a requirement to unzip the file, go for it then.
  • Just go to the web browser, and enter routerlogin.net over the search bar.
  • Now, a page will display over the desktop screen.
  • Enter the router admin username and the router admin password.
  • If you have not set any username and password yet, the default user name is Admin. The password is what you had entered for the first time when you logged in to the router. Make sure not to reveal the username and password ever to anyone.
  • Choose the “Advanced” and click on “Administration.” Else, choose the “setting” option, and then click on the Administration.
  • Now select the “Firmware Update” OR the “Router Update.”
  • Now, the router will start getting updated.
  • There are two options located; one is “Choose File,” and the second one is “Browse”. Click on one of the options from both and click on the firmware file, which ends with .img or .chk.
  • It is time to click on the “Upload” button.

It is the time when the Netgear Router starts updating. The router will restart. The update process will take around 2 minutes only, and this is where everything will work on for the correct update.

Final Words:

Now, if you want to update the Netgear Router, then follow the steps as mentioned above. These steps will help to update the Netgear Router properly. Please make sure not to break the order of the steps; otherwise, it will create a router problem to update appropriately.  

Filed Under: Guides

How to Factory Reset the Netgear Router?

August 29, 2020 By admin

Netgear Router is a very popular and well efficient router, which actually deserves to be the best one due to its excellent performance in the internet world. If we talk about resetting the Netgear Router, it needs to be done when the router is not working. In case, the router does not function accurately, then you must reset, or factory reset the Netgear Router.

In case, if you forgot the password, then you should reset the Netgear Router. Many of the folks exist, who knows about resetting is the solution, but they do not know how to factory reset the router. It is essential to follow a step by step guide to learn how to factory reset the Netgear Router. So here let us get started now without wasting a single minute.

  • How to Find Your Router IP Address?

When is Reset or Factory Resetting Required?

Resetting or factory resetting is necessary to do in the Netgear Router when the mentioned problem occurs:

  • When the Netgear Router turns off, then resetting can work on. 
  • The access page does not get connected due to entering the wrong password. 
  • WiFi does not fit or work properly. 
  • Check out the power cord fit properly. 
  • Do not forget to check out that the power supply is on or not.

How to Reset the Netgear Router?

  • Make sure, before you start resetting the router, the power is turned on or not. Just rotate the router to face its back towards your face side. 
  • You will see the reset button over there, which reset the Netgear Router to its default setting.
  • It would help if you had a clip to put inside the reset button. Press the reset button and hold the button pressed for a few seconds.
  • Now after releasing the reset button, wait for 10 seconds. The router will automatically start rebooting once it gets reset.
  • When the reset process starts, then the LED light will begin blinking over the router.
  • When the entire resetting process completes, the router will stop flickering.
  • Now your router is reset to its default setting.

How to Factory Reset the Netgear Router?

  • The Reset Button is positioned behind the router, press it from where the reset process will start.
  • Keep pressing the button for a few seconds with the help of the pinned side of the paper clip. After releasing the reset button a few seconds later, the rest process will start on.
  • When the rest process gets completed, now open the web browser over the PC.
  • Now type the http://routerlogin.net in the search bar.
  • Enter the username and password of the router over the login window.
  • You will receive a homepage that will display how you need to select the Administration option. The Administration Option is positioned under the Advanced Tab.
  • Now time to change the password. Select the Password option and change it. 
  • It would help if you put the older password first, and then the first one.
  • Do not forget to select the “Enable Password Recovery” option, which helps you to regain the password if you lose it in the future.
  • Now click on the “Apply” button, and you are good to go.

Final Words:

I hope now you can quickly factory reset your Netgear Router. In case of resetting the router, usually, the details mentioned above for that as well. So go ahead, and reset the router to attain the expected results.

  • How to Setup Netgear Router?

Filed Under: Guides

Recent Posts

  • How to Use Public Wi-Fi Safely?
  • How to Fix WiFi Connected But No Internet?
  • 192.168.1.1 Login – 192.168.I.I Default Username & Password
  • 192.168.0.1 Admin Login – 192.168.o.1 Default Username & Password
  • How to Update Netgear Router?

Recent Comments

    Archives

    • September 2020
    • August 2020
    • July 2020

    Categories

    • Guides

    Meta

    • Log in
    • Entries feed
    • Comments feed
    • WordPress.org

    RouterLogin.Kim